COMAC CS 60 II Manuel de service

CS 60 II I GBF D E Ed. 09/2006 Codice 410856

11WORK WARNING Before to operate every type of work: 1. Make sure that the parking brake is released 2. Make sure that the suction opening kn

12WORK MACHINE STARTING SWITCH 1. Turn the key in position 1 (clockwise direction). 2. Check that the batteries electric charge is enough to d

13WORK BRAKE OR EMERGENCY BRAKE USAGE Operating on the lever (1) you operate to brake or stop the machine speed. To stop completely the gear pre

14MAINTENANCE PROCEDURES WARNING ATTENTION! Before any adjustment and/or maintenance procedure always switch off the machine. ATTENTION! D

15MAINTENANCE PROCEDURES ADJUSTMENT OF SIDE BRUSH The regulation of the brush pressure on the floor can be made by adjusting the screw behind the

16TROUBLE SHOOTING GUIDE THE CENTRAL BROOM DOES NOT CLEAN 1. If the broom is worn or improperly positioned, adjust its position or if necessary

17BRUSH CHOICE AND USAGE POLYPROPYLENE BRUSH (PPL) It is used on any type of floores and it has a good resistance to wearing and to hot water (not

3SUMMARY ON DELIVERY OF THE MACHINE ...

4On delivery of the machine When the machine is delivered to the customer, an immediate check must be performed to censure all the material mention

5SYMBOLS Filter shaker Central broom rotation (automatic/manual traction) Side brush Horn Central broom Open book symbol. Points out to

6PREPARATION OF THE MACHINE 1. UNPACKING THE MACHINE The machine is delivered packed on a pallet. To move it use a fork truck or a pulley block

7PREPARATION OF THE MACHINE 4. BATTERIES ASSEMBLY AND CONNECTION (battery machine only) For the best mix of economy and usage we suggest fitti

8PREPARATION OF THE MACHINE 8. BATTERY CHARGE LEVEL INDICATOR The battery charge level indicator is digital with 4 fixed positions and a blinki

9 GENERAL SAFETY REGULATIONS The rules below must be followed carefully in order to avoid injury to the operator and damage to the machine.  Rea

10OPERATING THE MACHINE WORKING POSITION The user operates while sitting, having manual lever and pedal controls on the instruments control boa